DTF PET Film Roll – 30/60cm, Hot & Cold Peel

Our DTF (Direct-to-Film) PET film rolls are engineered for consistent, high-yield production on Epson-based DTF printers. The precision-coated release layer delivers sharp ink absorption, clean powder adhesion, and a smooth, crack-free transfer — whether you run hot-peel or cold-peel workflow.

Key Features

• Dual peel options: compatible with both hot-peel and cold-peel processes
• Stable coating: uniform matte surface prevents ink bleed and banding
• Anti-static & anti-curl: feeds smoothly through automatic cutters and roll feeders
• Vivid & durable: transfers resist washing and cracking on cotton, polyester, and blends
• Roll format: 30cm and 60cm widths, multiple lengths to fit your printer

Specifications

How to Use

1. Load the film roll with the coated (matte) side facing the printhead.
2. Print your design in mirror mode with DTF pigment ink.
3. Apply hot-melt powder evenly, then shake off the excess.
4. Cure the powder (oven or heat gun) until glossy and fully melted.
5. Heat press onto the garment at 150–160°C for 10–15s, then peel.
6. For best wash durability, wait 24h before the first wash.

FAQ

Q: Hot peel or cold peel — which should I choose?
A: Hot peel is faster for high-volume runs; cold peel gives a softer hand-feel. Both are supported by this film.

Q: Will it jam in my auto cutter?
A: The anti-static, low-curl construction is designed for roll feeders and automatic cutters.

Q: How should I store it?
A: Keep sealed in a cool, dry place (15–30°C, humidity <60%) away from direct sunlight.